CONTINENTAL EDISON CECTG4GFVB Guide D'utilisation page 50

Positioning
■ This appliance must be integrated in a kitchen unit or a 600mm worktop,
respecting the following minimum distances:
o The edges of the cooktop must be at least 60 mm from the side or rear walls.
o 700 mm between the highest point of the hob (including the burners) and the
bottom of any horizontal surface directly above it.
o 400 mm between the surfaces of the hob, provided that the lower part of the
horizontal surface is aligned with the outer edge of the hob. If the bottom of the
horizontal surface is less than 400 mm, it must be at least 50 mm distant from the
outer edges of the cooktop.
o 50 mm of space around the appliance and between the cooking surface and
combustible materials.
o You must leave a gap of at least 25 mm and up to 74 mm between the underside
of the unit and any surface below it.
III. INSTALLATION
Distance required when installing
the plate with a hood above.
49
45 mm