GiBiDi AS06321 Instructions Pour L'installation page 15

F4
5 - ELECTRICAL CONNECTIONS: TERMINAL BOARDS
Terminal Position
1
2
3
4
5
M1
6
7
8
9
10
M2
11
12
13
14
15
16
17
18
19
20
21
M3
22
23
24
25
26
27
RELAY CLEAN-CONTACT FOR:
28
• Fixed-light flashing light connection taking the power supply from terminals 7 and 8
M4
• Controlling a warning light to signal gate movement. Connect a 24VAC light powered
29
Signal Description
Motor 1 connection (opening)
Motor 1 connection (common)
Motor 1 connection (closing)
Motor 2 connection (opening)
Motor 2 connection (common)
Motor 2 connection (closing)
COURTESY LIGHT output (LIVE) if DIP1_9 = OFF
Fixed output for FLASHING LIGHT if DIP1_9 = ON
COURTESY LIGHT output (NEUTRAL) if DIP1_9 = OFF
Fixed output for FLASHING LIGHT if DIP1_9 = ON
N 115VAC power supply NEUTRAL
L 115VAC power supply LIVE
Earth wire connection
EARTH
Earth wire connection
EARTH
COM COMMON for LIMIT SWITCH, PHOTOCELL, STOP, START and PEDESTRIAN inputs
FCCM2 Closing limit switch input - MOTOR 2 (N.C.)
Opening limit switch input - MOTOR 2 (N.C.)
FCAM2
Closing limit switch input - MOTOR 1 (N.C.)
FCCM1
FCAM1 Opening limit switch input - MOTOR 1 (N.C.)
PHOTO PHOTOCELL input (N.C.)
START input (N.O.)
START
24VAC output for PHOTOCELL, ACCESSORIES power supply (max 8W)
24Vac
0Vac 0VAC output for PHOTOCELL, ACCESSORIES and ELECTRIC LOCK power supply
EL1 12VAC output for ELECTRIC LOCK (max 15W)
STOP input if DIP2_1 in OFF - EDGE input if DIP2_1 in ON.
STOP
If not used, make a bridge with terminal 25 and open jumper SW15.
PEDESTRIAN start input (N.O.) - ACTS ON MOTOR 1.
PED
The pedestrian operation is made using automatic logic and cannot be modified.
COM COMMON for LIMIT SWITCH, PHOTOCELL, STOP, START and PEDESTRIAN inputs
ANTENNA BRAID input
COM
ANTENNA CORE input
(the relay flashes fast during closing and slow during opening).
by terminals 20-21 (max 3W). The light flashes fast during closing, slow during
opening, it is on during pause and it is off during sleep time.
15
UK