Gentilin C 330/04 Traduction Des Instructions Originales page 42

Rev. 00 - 06/2014 - Instruction manual Compressor C 330/04 - C330/10 - C330/10+10 - C330/100
The appliance is packaged by the Manufacturer within a cardboard box equipped with two handles containing one
compressor and one use and maintenance instruction manual.
Once the package has been placed on the floor on a flat surface which ensures stability, proceed with unpacking; remove
the appliance from its packaging as per the instructions provided in Paragraph "TRANSPORTATION AND MOVEMENT OF
ThE APPLIANCE".
PlEaSE DiSPoSE oF tHE PaCKaGinG DiViDinG it UP aCCoRDinG to tHE VaRioUS WaStE MatERialS
anD in CoMPlianCE WitH lEGiSlation CURREntlY in FoRCE in tHE CoUntRY oF USaGE.
The appliance must be placed in a work place which satisfies the characteristics described in Paragraph "INTENDED USE";
it must be placed on a flat surface which ensures stability with regards to overall dimensions and weight (see Paragraph
"TEChNICAL SPECIFICATIONS").
in oRDER to EnSURE a SaFE WoRKinG EnViRonMEnt FoR aUtHoRiSED oPERatoRS, WE RECoMMEnD
PlaCinG tHE aPPlianCE at a MiniMUM DiStanCE oF 1m FRoM otHER oBJECtS/EntitiES.
• In the instance where the appliance is not to be used for an extended period of time, it must be stored in a safe place,
with suitable temperature and air humidity values, where it is protected from dust.
• Before storing the appliance, we recommend draining moisture from the air tank.
The machine can be connected to the mains electrical supply by plugging the power cable
into the special socket.
tHE PoWER SUPPlY nEtWoRK to WHiCH tHE aPPlianCE iS ConnECtED MUSt ConFoRM to tHE lE-
GiSlation CURREntlY in FoRCE in tHE CoUntRY oF USaGE, ConFoRM to tHE tECHniCal SPECiFiCa-
tionS PRoViDED in PaRaGRaPH "tECHniCal SPECiFiCationS" anD BE EQUiPPED WitH a SUitaBlE
"Plant EaRtHinG" SYStEM.
all MatERialS USED FoR ElECtRiCal ConnECtion MUSt BE SUitED to tHE intEnDED USaGE, laBEllED
WitH "CE" iF SUBJECt to tHE loW VoltaGE DiRECtiVE 2006/95/CE anD ConFoRM to tHE REQUiREMEntS
aS SPECiFiED in tHE lEGiSlation CURREntlY in FoRCE in tHE CoUntRY oF aPPlianCE USaGE.
DiSREGaRD FoR tHE aBoVE DESCRiBEDWaRninGS MaY lEaD to iRREPERaBlE DaMaGE to tHE aPPlianCE
ElECtRiCal SYStEM anD SUBSEQUEntlY WaRRantY EXPiRY.
tHE ManUFaCtURER DEClinES anY RESPonSiBilitY FoR FaUltS oR anoMoliES WitH aPPlianCE oPERa-
tion CaUSED BY ElECtRiCal PoWER SURGES in aDDition to tolERanCES BY tHE SUPPlY EntitY (VoltaGE
± 10%, FREQUEnCY ± 2%).
WHERE nECESSaRY, ConnECt tHE aPPlianCE EXClUSiVElY to tHE ElECtRiCal SUPPlY GEnERatoR WitH
PoWER GRtEatER tHan tHE inStallED ElECtRiCal PoWER (SEE PaRaGRaPH "tECHniCal SPECiFiCationS"),
in oRDER to SUPPoRt tHE PoWER-DRaWat StaRt-UP.
14
ELECTRICAL CONNECTION
PACkAGING
UNPACkING
LOCATION
STORAGE