SolaX Power T-BAT-H 5.8 Manuel D'installation page 103

Steps to Disassemble Cable / Schritte für das Entfernen des Kabels / Étapes de
déconnexion du cable / Pasos para desenchufar el cable / Passos para Desconectar
Cabo / Stappen om de kabel los te koppelen. / Passaggi per scollegare il cavo /
Czynności w celu odłączenia przewodu / Postup pro odpojení kabelu / Steg för att
koppla bort kabeln / Pași pentru deconectarea cablului / Стъпки за разкачване на
кабела / Trin til at tage kablet ud af stikket / Βήματα για αποσύνδεση καλωδίου / Kaabli
lahtiühendamise etapid / Kaapelin irrotusvaiheet / Koraci za odspajanje kabela / Kábel
szétszerelésének lépései
Postup odpojenia kábla / Navodila za odklop kabla / Kabloyu Sökme Adımları / Etapas
para Desmontar o Cabo / ‫تالباكلا كيكفت تاوطخ‬
1
2
*Note: The steps for disassemble cables on the T-BAT H 5.8 or T-BAT H 5.8 V2 are the
same.
Kabelio atjungimo veiksmai / Kabeļa atvienošanas soļi /
BAT- BAT+
BM S
Insert a slot type screwdriver into
the terminal groove of power
cable.
*Note: The system must be
turned off before disassembling
the power cable. Otherwise, it
may produce an arc discharge
that causes a serious injury.
Insert the power cable
disassembling tool into the terminal
groove of the power cable, and
then unplug it.
*Note: The system must be turned
off before disassembling the power
cable. Otherwise, it may produce an
arc discharge that causes a serious
injury.
97