SolaX Power T-BAT-H 5.8 Manuel D'installation page 97

Power cable connection between T-BAT H 5.8 (T-BAT H 5.8 V2) and HV11550 (HV11550 V2)
T-BAT H 5.8
YPLUG
-
T-BAT H 5.8 V2
YPLUG
-
2
*Note: Waterproof cap must be put on the unconnected communication port.
XPLUG
+
Left side
XPLUG
Left side
series-connected
-
cable
waterproof cap
series-connected
cable
+
BMS to battery module (left
YPLUG
side):
• "-" to "+";
• "YPLUG" to "XPLUG";
Battery module (right side):
• "-" to "YPLUG".
*Note: If more than 2
battery modules (including
2) need to be connected
wires, do as follows:
BMS to battery module (left
side):
• "-" to "+";
• "YPLUG" to "XPLUG";
Battery module (right side)
to battery module (left
side):
• "-" to "+";
• "YPLUG" to "XPLUG";
Battery module (right side):
• "-" to "YPLUG".
Right side
YPLUG
-
waterproof cap
Right side
91