SolaX Power T-BAT-H 5.8 Manuel D'installation page 104

Power on the System / Schalten Sie das System ein / Mise sous tension du système
/ Encienda el sistema / Ligue o sistema / Het systeem inschakelen / Accensione del
sistema / Włączanie systemu / Zapnutí systému / Slå på systemet / Pornire sistem
/ Включване на системата / Tænd for systemet / Ρεύμα στο σύστημα / Süsteemi
sisselülitamine / Kytke järjestelmän virta päälle / Napajanje sustava / Rendszer áram
alá helyezése / Įjungti sistemą / Ieslēdziet sistēmu / Zapnite system / Vklopite sistem /
Sistemin Gücü / Ligar o sistema / ‫ماظنلا ليغشتب مق‬
The steps for power on T-BAT H 5.8 or T-BAT H 5.8 V2 are the same. Take the power-on
procedure of T-BAT H 5.8 V2 as an example, with details as below:
1
3
98
Loosen screws
at both sides
2
4. Slide the DIP switch to corresponding number with a
small flat-head screwdriver based on the actual situation;
5. Switch the circuit breaker to ON;
6. Press the POWER button to start the system
6
Loosen screws
4
5