Publicité
Les langues disponibles
Les langues disponibles
Stop the pump
• To reduce the risk of injury, always stop the machine :
- before cleaning or clearing a blockage
- before installing or removing attachments
- before checking, maintaining or working on the product
- if the machine starts to vibrate abnormally (inspect
immediately).
4.5 SPECIFIC FUNCTIONS
Automatic function
Pressure will go down gradually as water is used. When the pressure falls below the minimum value, the
pump will start automatically.
5. TRANSPORTATION
5.1 TRANSPORT THE MACHINE
CAUTION In order to prevent accidents or injuries,
keep in mind the weight of the appliance during transport
(see Technical Data).
Protect the product from any heavy impact or strong vibrations which may occur during transportation
in vehicles. If you want to transport the appliance on a vehicle secure it from slipping or vibrating.
Secure the product to prevent it from slipping or falling over.
6. WINTERING
Illustration 6.1 to 6.4
Follow all instructions given on chapter storage below.
7. STORAGE
7.1 STORE THE MACHINE
The instructions mentioned in the maintenance section must be carried out before any storage.
Illustration 6.1 to 6.3
• Completely drain the pump, allow it to dry and put back the two connector caps.
•
• Store the unit and its accessories in a frost-free place.
• The unit should always be stored in a clean, dry, ventilated place out of the reach of children. Ideally, the
temperature of the room in which the device is stored should be between 4 and 24°C.
• We recommend that you store the unit in an upright position, in its original package.
illustration 4
209
FR
FR
ES
ES
PT
PT
IT
IT
EL
EL
PL
PL
RU
RU
KZ
KZ
UA
UA
RO
RO
EN
EN
Publicité
