EINHELL TP-ET 18 Li BL Mode D'emploi page 13

equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless routing unit
•
Fixed base
•
Dust chute
•
Compass point
•
Collet (1/4")
•
Trimmer roller guide
•
Edge guide
•
Open-ended wrench (2x)
•
Template guide
•
Safety guard
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
Anl_TP_ET_18_Li_BL_SPK7_USA.indb 13 Anl_TP_ET_18_Li_BL_SPK7_USA.indb 13
EN
3. Intended use
This cordless router with fi xed base is designed
primarily for the machining of wood and plastic. Its
uses include the cutting out of knots, the cutting
of slots, the forming of recesses, the copying of
curves and lettering, fl ush-trimming, etc. This
cordless router with fi xed base is not allowed to
be used for the machining of metal, stone, etc.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
4. Technical data
Motor power supply: ............................ 18V
No load speed: ....................10,000 - 30,000 RPM
Stroke height (routing depth): ....................... 1.58"
Collet:: ......................................................... Ø ¼"
Max. router bit diameter: .............................. 1.18"
Weight (Tool only): .....................................2.9 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
- 13 -
27.07.2023 08:03:51 27.07.2023 08:03:51