Machine And Control Panel Components - Tennant S6 NA Manuel De L'opérateur

MACHINE AND CONTROL PANEL
COMPONENTS:
The machine is equipped with a simple panel control that controls all the
operational functions of the machine.
B) Led indicator for battery charge
C) Display switch
F) Vacuum fan switch
G) Numeric display
The functions located on the control panel can be explained as follows:
B) Led indicator for battery charge. Green for when the machine is
charged, red for when the machine is discharged and yellow for when
the machine charge is in reserve or when the machine is being charged.
C) Numeric display switch: pressing this switch, a part from seeing the
machine voltage, the display indicates the working hours of the machine
(pressing the switch once) and minutes (pressing the switch twice).
the machine to work with two separate sweeping mode: mode 1 for light
debris collection and mode 2 for heavy debris collection.
F) Vacuum fan: the vacuum fan automatically activates when sweeping
mode is on. Therefore the switch is used when the requirements are to
G) Numeric display
L
F
E
A) CONTROL PANEL
B) CHARGER FUSE (1.25A)
C) HANDLE LOCKS
D) BUMPER
E) SIDE BRUSH
F) TOP COVER
G) WARNING LABEL
H) CHARGER CORD COMPARTMENT
I) HOPPER
J) BRUSH
K) BATTERY FUSE (20A)
L) ACTUATOR FUSE (2,5A)
EN
A
K
G
H
J
D
FUSE 1.25A
B
C
I
5