BH FITNESS G112B Instructions De Montage Et Utilisation page 12

1. ASSEMBLY INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there:
The assistance of a second person
is required for assembling this
machine.
Fig.1.-
(1) Top body.
(2) Vertical mast.
(3) "Butterfly" arm rotation support.
(6) Seat support.
(7) Seat hand support.
(10) Main post.
(11) Outer stabiliser.
(12) Feet support plate.
(13) Weight columns.
(14) Weight selector post.
(15) Butterfly bars.
(17) Linear pulley plates.
(18) Short exercise bar.
(19) Long exercise bar.
(20) Leg tube covers.
(21) Front right side panel.
(22) Rear left side panel.
(23) Backrest.
(24) Seat.
(25) Butterfly exercise selector.
(26) Seat locking pin.
(27) Leg lock pin.
(28) Bottom washer for weights.
(29) Weight selector.
(30) Top cover.
(31) Weight cable chain.
(32) Leg pull-up cable chain.
(33) Chain hook.
(39) Leg support adjustment knob.
(40) First weight lockpin.
(41) First weight holding collar.
(42) Top weight.
(43) Weight set.
(52) 45x45 tube cap.
(53) 25 diameter tube cap.
English
(54) 45 diameter tube cap.
(55) Arm stop protector.
(57) Large pulley.
(59) M-12 nut cover.
(62) Arm limit plate.
Fig.2.- NUTS & BOLTS.
(63) Bolts M-10x20.
(64) Bolts M-10x25.
(65) Bolts M-10x30.
(66) Bolts M-10x50.
(69) Bolts M-10x80.
(70) Bolts M-10x85.
(71) Bolts M-8x20.
(72) Bolts M-5x10.
(73) Bolts M-12x110.
(74) Flat washers M-5.
(75) Flat washers M-8.
(76) Flat washers M-10.
(77) Washers M-10.
(78) Flat washers M-12.
(79) Flat washers 19x40.
(80) Self-locking nut M-10.
(81) Self-locking nut M-12.
(82) Flat washers 26x46.
(83) Flat washers 13x32.
(84) Seat support adjustment knob.
ASSEMBLY.-
1- Place the base tube (1) close to the
rear tube (11) Fig.3, fix with the
screws (70), washers (76) and nuts
(80) and tighten firmly.
FITTING THE WEIGHTS.-
2.- Fit the guide post (13) along with
washers (28) and the bottom weight
stops (52) as shown in Fig.4.
3.- Next, place the weights onto the
guide post as shown in Fig.4, in
correct alphabetical order with the
letters facing the front of the machine,
beginning with the letter "L".
12