Yamaha TT-R50E Manuel D'atelier Du Proprietaire page 276

AC MAGNETO AND STARTER CLUTCH
1
INSPECTION
Starter clutch
1. Inspect:
2. Check:
É
Checking steps:
• Install the starter wheel gear onto the
• When turning the starter wheel gear clock-
È
• When turning the starter wheel gear coun-
ASSEMBLY AND INSTALLATION
Starter clutch
1. Install:
2. Unloosen the starter clutch assembly by
4 - 45
• Starter idle gear teeth a
• Starter drive gear teeth b
• Starter wheel gear teeth c
Burrs/chips/roughness/wear → Replace.
• Starter clutch operation.
starter clutch and hold the starter clutch.
wise È, the starter clutch and the starter
wheel gear should be engage, otherwise
the starter clutch is faulty and must be
replaced.
terclockwise É, it should turn freely, other-
wise the starter clutch is faulty and must
be replaced.
• Starter clutch 1
14 Nm (1.4 m · kg, 10 ft · lb)
using the center punch.
ENG