Yamaha TT-R50E Manuel D'atelier Du Proprietaire page 136

ENGINE OIL LEVEL INSPECTION
1
AIR FILTER CLEANING/
2. Clean:
• Air filter element
Clean it with solvent.
NOTE:
After cleaning, remove the remaining solvent
by squeezing the element.
CAUTION:
• Do not twist the element when squeezing
the element.
• Leaving too much of solvent in the ele-
ment may result in poor starting.
3. Inspect:
• Air filter element
Damage → Replace.
4. Apply:
• Foam-air-filter oil or engine oil
To the element.
NOTE:
Squeeze out the excess oil. Element should be
wet but not dripping.
5. Install:
• Air filter element
• Air filter case cover
• Air scoop (left)
• Seat assembly
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
minutes, and then turn off the engine and
wait for five minutes.
2. Place the machine on a level place and
hold it up on upright position by placing the
suitable stand under the engine.
3. Remove:
• Oil filler cap 1
3 - 7
INSP
ADJ