Refresh
The Refresh cycle is designed to release wrinkles from
items that are clean and dry but only slightly wrinkled,
such as from a crowded closet or suitcase or from
sitting in the dryer too long after the cycle has ended.
Refresh can be used with any temperature selection.
Regular
The Regular cycle is designed to dry loads such as
towels and underwear.
Jeans
The Jeans cycle is designed to reduce wrinkling and
tangling in loads of jeans.
No Iron
The No Iron cycle is designed to dry wrinkle-free
cottons, synthetic fabrics, knits and permanent press
fabrics automatically. The cycle minimizes wrinkling by
providing a longer unheated cool-down period at the
end of the cycle.
Cycles and options may vary by model.
Delicates
The Delicates cycle is designed to dry heat-sensitive
items at the Delicates drying temperature.
Time Dry
The Time Dry cycle can be used to regulate the drying
time. Use with any temperature setting. For timed
drying, turn the cycle selector dial to the number of
minutes desired. An indicator light will illuminate by
the setting.
Note: Using the Air Fluff temperature setting will
require a longer drying time.
STEP
5
Start the Dryer
After setting the cycle and desired options, press the
cycle selector dial to start the dryer. To pause the
cycle, press cycle selector dial again. To restart the
cycle, press cycle selector dial and the cycle will
resume from the point of interruption.
Power Off
Turn the cycle selector dial to Power Off and press
cycle selector dial to cancel the cycle and stop the
dryer.
Cont.
6