Publicité
Les langues disponibles
Les langues disponibles
Using the Controls - Auto Dry Models
STEP
1
Select Temperature
In order to select the correct temperature, turn the
Temperature control to one of four choices; Regular,
Medium (select models), Delicate or Air Fluff.
DRYER TEMPS
Sturdy cottons or labels marked
Regular
Tumble Dry.
Medium
For wrinkle-free/permanent press
(select models)
synthetics and lightweight cottons
labeled Tumble Dry Medium.
Delicate
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Air Fluff
Load tumbles with room
temperature air.
STEP
2
Select Options
End of Cycle Signal
When the cycle is complete, a signal will sound. The
signal can be canceled by turning the switch to Off.
Remove load immediately to reduce wrinkling.
Extended Tumble
Extended Tumble is provided to minimize wrinkles in
the Auto Dry No Iron Fabrics cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle.
The additional 60 minutes of unheated tumbling can
be canceled by turning the switch to Off.
3
LOAD TYPE
(select models)
STEP
3
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry Regular cycle, the
control dial should point between More Dry and Less
Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled to reduce wrinkling for approximately
10 minutes.
Auto Dry No Iron Fabrics
The Auto Dry No Iron Fabrics cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled for approximately 10
minutes to reduce wrinkling. If the load is not removed
from the dryer and Extended Tumble (select models)
has been selected, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).
Publicité
