AEG LFW6I7264B Notice D'utilisation page 21

11.8 The ProSense load
detection
After touching the Départ/Pause button
the ProSense technology starts the
laundry load detection:
1. The appliance detects the load
within a few minutes, the indicator
blink, the drum rotates shortly.
2. At the end of the load detection, the
indicator goes off .
About 20 minutes after the
programme start, the
programme duration could
be adjusted depending on
the capacity of water
absorption of the fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
11.9 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button Départ/Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Départ/Pause
again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button Marche/Arrêt to
cancel the programme and to
deactivate the appliance.
2. Press the button Marche/Arrêt again
to activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste.
11.11 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1. Touch the button Départ/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the button
Départ/Pause.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
Vidange/Essorage programme and
than press Départ/Pause button.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Départ/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the Marche/Arrêt button to
deactivate the appliance.
ENGLISH 21