Ivoclar Vivadent IPS PressVEST Speed Mode D'emploi page 5

Mixing ratio:
Vacuum mixing time
Investing
Working time
Setting time
Indication
Single crowns, veneers,
partial crowns
3-unit bridges
Press on Galvano
Indication
Press on ZrO
2
single crowns
Press on ZrO
2
bridges
Press on ZrO
2
inlay-bridges
Indication
Single crowns
3-unit bridges
Indication
Preprosthetic build-up in
combination with
CosmoPost
Indication
Pressing restorations on
opaquerized metal
frameworks
The percentages are approximate and can be adjusted if necessary. Do not dilute concentrate to less
than 40 %.
– 2.5 minutes (approx. 350 rpm at room temperature)
– If you use a 'High-Speed' mixing device, shorten the vacuum mixing time accordingly.
– Slightly vibrate the ring on a dental vibrator while pouring the material into the ring. Avoid vigorous
shaking.
– Approx. 6–7 minutes (mixed at room temperature and 350 rpm)
– 30 minutes (min. 30 to max. 45 minutes)
– Do not disturb the ring during the setting stage
IPS e.max Press
Concen- 100 g ring
tration Liquid : distilled H
60% 16 ml : 11 ml
50%
60% 16 ml : 11 ml
IPS e.max ZirPress
Concen- 100 g ring
tration Liquid : distilled H
60% 16 ml : 11 ml
50%
50%
IPS Empress 2
Concen- 100 g Muffel
tration Liquid : distilled H
60% 16 ml : 11 ml
50%
IPS Empress Cosmo
Konzen- 100 g ring
tration Liquid : distilled H
40– 11 ml : 16 ml
50% 13.5 ml : 13.5 ml
IPS InLine PoM – Press-on-Metal ceramic
Concen- 100 g ring
tration Liquid : distilled H
60% 16 ml : 11 ml
200 g ring
O Liquid : distilled H
2
32 ml : 22 ml
27 ml : 27 ml
32 ml : 22 ml
200 g ring
O Liquid : distilled H
2
32 ml : 22 ml
27 ml : 27 ml
27 ml : 27 ml
200 g Muffel
O Liquid : distilled H
2
32 ml : 22 ml
27 ml : 27 ml
200 g ring
O Liquid : distilled H
2
22 ml : 32 ml
27 ml : 27 ml
200 g ring
O Liquid : distilled H
2
32 ml : 22 ml
O
2
O
2
O
2
O
2
O
2