Publicité
Les langues disponibles
Les langues disponibles
EN
1] Remove the protective films from the double-sided tapes.
2] Take the provided black mounting plate and stick the double-sided tape on its
back.
3] Remove the second protective films from the double-sided tapes already
sticked.
4] Following the orientation indicated on the front part of the black mounting
plate, press it on a flat, clean, and dry surface. Make sure it is firmly fastened
to the surface.
5] First clip the square frame onto the black mounting plate.
NOTICE
Make sure Amy 1 sun protect Modes io is switched on before clipping the module
(refer to Switching on Amy 1 sun protect Modes io).
6] Clip the Amy 1 sun protect Modes io module onto the black mounting plate.
Press firmly on the front of the module, on the right and left near the my
button as close as possible to the translucent circle without pressing on the
edges of the module (to avoid unwanted radio transmission), until it clicks into
place.
2.5.1.2. Using screws
CAUTION
• Do not use an electric screwdriver.
• The order of assembly must be followed to ensure that the parts fit together
correctly and don't get damaged.
• To fix the black mounting plate on a flush-mounted box, the 2 screw holes of
the flush-mounted box must be horizontal and not vertical.
• In case of wrong mounting, use a cover plate to hide the box and fix with
double tape.
NOTICE
To fix the black mounting plate directly on the wall, use either the 2 horizontal holes, or the 4 holes in each corner.
1] Fix the black mounting plate using screws appropriate for hole size and wall
type, following the orientation shown on the front panel.
2] First clip the square frame onto the black mounting plate.
NOTICE
Make sure Amy 1 sun protect Modes io is switched on before clipping the module
(refer to Switching on Amy 1 sun protect Modes io).
3] Clip the Amy 1 sun protect Modes io module onto the black mounting plate
through square frame. Press firmly on the front of the module, on the right
and left near the my button as close as possible to the translucent circle
without pressing on the edges of the module (to avoid unwanted radio
transmission), until it clicks into place.
8
1]
2]
3]
4]
5]
6]
1]
2]
3]
©
Copyright
2024 SOMFY ACTIVITES SA. All rights reserved.
Amy 1 sun protect Modes io
TOP
TOP
Publicité
