SOMFY Amy 1 sun protect Modes io Notice page 12

EN
With mode 4 selected (Interior Venetian Blinds)
▪ Briefly press the Up or Down button to tilt the slats.
▪ Press and hold the Up or Down button to raise or lower venetian blinds.
The feedback LED flashes green during activation of the motorised product(s).
3.2.Stop/my button
▪ The motorised product(s) are being activated:
◦ Briefly press my to stop the motorised product(s) from activating.
▪ The motorised product(s) are stopped:
◦ Briefly press my to move the motorised product(s) to their favourite
position (my).
NOTICE
To use the favourite position (my) function, the motorised products must not be activated and their favourite position
(my) must be registered [refer to Saving or modifying the favourite position (my)].
3.3.Saving or modifying the favourite position (my)
NOTICE
Refer to the instructions guide for the io drive or receiver to ensure it includes this function.
1] Press the Up or Down button to send the motorised product in the desired
position.
2] Briefly press my to stop the motorised product in the desired position.
3] Press and hold my until the activation of the motorised product to save or to
modify the favourite position (my).
3.4.Checking the battery level
When the battery level is low, the feedback LED on the front of Amy 1 sun protect
Modes io dims progressively during activation of the motorised product(s). When the
battery is too weak, the control point can no longer transmit radio orders, its
operation is inhibited.
Battery status can be checked on TaHoma application, if Amy 1 sun protect Modes io has been added in TaHoma, and an
alert may be sent out if this feature is activated (Follow the instructions in TaHoma application).
12
< 0.5 s
> 0.5 s
1]
2]
3]
©
Copyright 2024 SOMFY ACTIVITES SA. All rights reserved.
Amy 1 sun protect Modes io
< 0.5 s
> 0.5 s
5 s