Publicité
Les langues disponibles
Les langues disponibles
EN
Briefly press once or several times in succession the T°/Mode button to select the
desired mode.
Number of short presses
Briefly press 1 time
Briefly press 2 times
Briefly press 3 times
Briefly press 4 times
Briefly press 5 times
Briefly press 6 times
Briefly press 7 times
Briefly press 8 times
2.2.Adding/Deleting Amy 1 sun protect Modes io
NOTICE
To program the first control point, refer to the instructions for the io drive or receiver.
The procedures for adding or deleting Amy 1 sun protect Modes io are the same.
NOTICE
It is advisable to do next steps with front panel buttons deactivated to avoid sending unwanted commands by
manipulating the module (refer to Switching on Amy 1 sun protect Modes io).
To add or delete Amy 1 sun protect Modes io, use the Somfy local io control point
already paired with the motorised product.
1] Position the motorised product at its half-way position.
2] On the individual control point already paired with the motorised product:
ð Press the PROG button until the motorised product moves up and down:
programming mode is activated.
3] On Amy 1 sun protect Modes io to be added or deleted:
ð Briefly press the PROG button: the motorised product moves up and
down and Amy 1 sun protect Modes io is added or deleted.
2.3.Switching on Amy 1 sun protect Modes io
1] To activate the front panel buttons, long press the On/Off button until the
settings feedback LED lights up green. It switches from Off status to On
status.
2] To deactivate the front panel buttons, long press the On/Off button until the
settings feedback LED lights up red: this indicates the Off status.
6
Control mode selected
1
2
3
4
1
2
3
4
Copyright
Amy 1 sun protect Modes io
0.5 s
Low Power mode management
LPM activated
LPM activated
LPM activated
LPM activated
LPM deactivated
LPM deactivated
LPM deactivated
LPM deactivated
1]
2]
3]
1]
>2 s
2]
>2 s
©
2024 SOMFY ACTIVITES SA. All rights reserved.
2 s
0.5 s
Publicité
