Installation; Protection Cap - oventrop AV 9 Notice D'utilisation

Thermostatic valve AV 9
Mechanical influences
Radiation
Chemical
influences
6.

Installation

WARNING
Risk of injury from pressurised components
Fluids escaping under pressure may lead to injuries.
f Make sure that the max. operating pressures and the max. and
min. operating temperatures are not exceeded or undercut, for
instance by installing a safety valve.
NOTICE
Risk of damage to property due to foreign bodies (e.g. shav-
ings, dirt), sealants and lubricants
Valves can be damaged and their function be impaired by foreign
bodies, greasing agents or oil.
f Do not use any greasing agents or oil for the installation.
f Flush any dirt particles or grease or oil residues out of the
pipework before installing the product.
f Consider the latest technical status (e.g. VDI 2035) when
choosing the operating fluid.
f Install a strainer in the supply pipe to avoid contaminated
operating fluids (VDI 2035).
Please observe that the direction of flow always has to conform
to the direction of the arrow on the valve body. (For thermostatic
valves CV 9, please observe the specifications on the packaging.)
6.1

Protection cap

The thermostatic valve is supplied with a plastic protection cap. It protects
the valve stem and can be used for setting of the flow rate during the con-
struction period.
f Turn the protection cap clockwise to close the valve.
f Turn the protection cap anticlockwise to open the valve.
118370380-V01.05.2020
Protected from mechanical agitation
Protected from UV-rays and direct
sunlight
Do not store together with solvents,
chemicals, acids, fuels and similar
Installation
27