Publicité
Les langues disponibles
Les langues disponibles
7. Slide the food pusher down the food chute
by aligning the groove in the food pusher,
with the small protrusion on the inside of
the top of the feed tube.
Food
pusher
groove
8. Place the pulp container into position by
tilting and lifting the motor base slightly.
Insert the pulp container under the juicer
cover on the back ensuring it is supported
by the juicer cover and motor base.
9. Fit the lid to the juice jug and position jug
under juice spout.
JUICE JUG
Juice can be preserved in the juice jug for up to
3 days by following these steps.
1. Lift the lid off the jug and rotate 180°
2. Press down firmly to replace the lid
3. Store juice in the fridge
NOTE
Storage time depends on the ingredients being
juiced and the freshness of the fruit prior to
juicing. Juice must be stored in the refrigerator
between 32°F to 39°F.
8
1. Wash your selection of fruit and vegetables
to be juiced. Most fruit and vegetables
such as apples, carrots and cucumbers
will not need to be cut or trimmed to size
as these will fit whole into the feed chute.
Ensure vegetables such as beets, carrots
etc. have all soil removed, are washed
Small
well and trimmed of leaves before using.
protrusion
inside
feed tube
2. Plug the power cord into a 120V power outlet.
IMPORTANT
Do not load feed chute with produce before the
Juicer has reached the selected speed.
3. Turning the Juicer On
Turn dial to desired speed setting. Turn dial
to medium speed for most juicing needs. For
harder fruits/vegetables and leafy greens
select the "Hard" range. Use the speed
selector when applicable to match the speed
and produce type, for maximum yield.
4. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract
the maximum amount of juice, always
push the food pusher down slowly.
5. Full Juice Jug
You can keep juicing until the juice jug
is filled to max. level.
6. Continuous Juicing
Having just filled and removed a juice jug
with fresh juice, you can place an empty
juice jug back onto the nozzle and continue
juicing without disassembly. When the pulp
container is near full with pulp, turn the dial
to "Off", remove the pulp container only
and empty contents. Replace the empty
pulp container and turn dial to desired
speed selection to continue juicing.
Functions
Publicité
