Far Tools DP 45C Notice Originale page 27

Settings of the machine
FIG. F
Belt tension
01
-
02
replacing consumables
FIG. G
Accessories available
01
-
02
Maintenance, recommendations and advice
The use of suitable accessories in good condition will ensure the machine operates optimally
01
Spindle lubrication
02
To avoid rust, grease machined metal parts ( table, column, etc.)
03
Check the condition of the belts regularly
04
Lubricate the bit when drilling with a mixture of soluble oil and water
05
Adapt the rotation speed of the chuck to the diameter of the drill:
06
- Small diameter = high speed
- Large diameter = low speed
111137-Manual-E.indd 27
Setting the drawback spring
03
-
04
© FAR GROUP EUROPE
EN
7/08/13 11:35:41