EGO PRO X PTX5100 Mode D'emploi page 5

Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles or
safety glasses with side shields and a full
face shield when needed. We recommend a
Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields.
56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
XX
Indicates DANGER,
Indicates a potential personal
Safety Alert
injury hazard.
Read
To reduce the risk of injury, user
Operator's
must read the operator's manual.
Manual
To prevent electrocution, do not
Keep sufficient operate within 15m of overhead
distance away electrical lines. Contact with or
from electrical use near power lines may cause
power lines serious injury or electric shock
resulting in death.
Guaranteed sound power
level. Noise emission to the
Noise
environment according to the
European community's Directive.
This product is in accordance with
CE
applicable EC directives.
This product is in accordance
UKCA
with applicable UK legislation.
XX
Waste electrical products
should not be disposed of with
WEEE
household waste. Take to an
authorized recycler.
Never attempt to operate your
power tool with one hand. Loss
of control of the power tool
Keep hands resulting in serious or fatal injury
and feet away may result. To reduce the risk of
XX
from the cut injuries, keep hands and feet
cutting tool away from the cutting tool. Never
attach a moving cutting tool with
your hand or any other part of
your body.
Wear eye Always wear eye and head
and head protection when operating this
protection product.
IPX5 IP Symbol Protection against water jets
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
kg Kilogram Weight
Type or a characteristic of
Direct Current
current
EN
5