Table des Matières
Publicité
FIG. 1
STORAGE CASE
RANGEMENT
LAGERUNG
ALMACENAMIENTO
CUSTODIA
FIG. 2
BLADE REPLACEMENT - CHANGEMENT DES LAMES - SCHNEIDMESSERWECHSEL -
CAMBIO CUCHILLAS - CAMBIO LAME
13
20
18
16
14
17
12
10
04
32
1. GENERAL CHARACTERISTICS
– Application range: suitable for cutting copper, aluminium or telephone cables
having a max ø of .......................................................................85 mm
– Max operating pressure: ..........................................................700 bar
– Dimensions: length ....................................................................409 mm (16.1 in.)
– Weight: .......................................................................................4,9 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
The head is equipped with a "self-lock" quick male coupler suitable for connection to a
hydraulic, pneumatic or electric pump from the Cembre range.
Insert the cable between the blades, up to the desired cutting point. For a running cable,
release the latch (26) and open the tool head.
Fully retract the lower blade (10) before attempting to open the tool head.
With the cable on the lower blade (10), close the tool head and fully secure the latch
(26).
Before commencing the cutting operation ensure that the latch (26) is fully secured:
26
partial closure may damage the head.
2.2) Blade advancement
Operate the pump to advance the lower blade.
Make sure the blades are exactly positioned on the desired cutting point; otherwise retract
the lower blade, as § 2.4 and re-position the cutting head.
2.3) Cutting
Continue operating the pump to close the blades and progressively cut the cable.
The head is designed for cutting copper, aluminium and telephone cables: do
not attempt to cut steel ropes or steel reinforced cables (ACSR).
2.4) Blade opening
To open the blades, fully discharge the oil pressure from the pump.
17
2
HYDRAULIC CUTTING HEAD
TC085
width .....................................................................135 mm (5.3 in.)
(Ref. to Fig. 3)
ENGLISH
(3-3/8" in.)
(10,000 psi)
(10.8 lbs)
Publicité
Table des Matières
