Tineco CARPET ONE PRO Serie Mode D'emploi page 39

Stop Working
In AUTO/MAX/DRY mode, the appliance will
stop working when put uprightly and start
running again when reclined.
Note:
• Pretreat spots and heavy traffic areas with Tineco Pretreat Cleaning Solutions to achieve better
cleaning effect. Follow Directions on bottle.
• The carpet cleaner differs from the traditional vacuum cleaner.
• In all modes, it blows hot air, whose temperature is 70-80°C.
* Appropriate temperature is conducive to dissolve the dirt and helps surfactant in the solution to decompose the dirt.
• In AUTO/MAX mode, it sprays water when moving forward and stops spraying when moving backward.
• Take a spot test on a small and marginal area of the carpet for colorfastness. Gently rub surface
with a damp white cloth. Then wait for ten minutes and check for color removal.
• During use, don't keep the appliance at a resting position for a long time.
• Important: Keep the foot of the deep cleaner perpendicular to the rug's edge with each cleaning pass to
prevent damage.
• Important! Please check manufacturer's tag before cleaning area rugs for any specialized cleaning
instructions. It's not advisable to perform deep cleaning on delicate, silk, wool, antique or area rugs
without a manufacturer's tag.
• Some Loop Berber carpets, Natural Fiber (including silk and wool), and Soft Fiber carpets can fuzz with
wear. Some vacuums & carpet cleaners can worsen this carpet wear. If cleaning on Berber, Natural Fiber,
or Soft Fiber carpeting, first test on a small hidden area of carpet by running the carpet washer over it. If
no fuzzing or overwetting occurs, continue cleaning. Avoid overwetting Berber carpets. If you have any
questions or concerns, consult with your carpet manufacturer on deep cleaning recommendations.
• Avoid using it on rugs or carpets that require dry cleaning.
• For upholstery, check cleaning code - Use your Tineco Carpet Washer only if the upholstery fabric is
marked with a "W" (for "wet" clean) or "S/W" (for "solvent/dry" or "wet" clean). Do not clean fabric
marked "S" ("solvent/dry" clean only). If your upholstery does not have a code, seek professional
assistance .
• Test for colorfastness - Wet a white absorbent cloth with the solution. In a small, hidden area, gently rub
the surface with the dampened cloth. Wait for ten minutes and check for color removal. If surface has
more than one color, check all colors.
Grip the back carry handle to lift or move
appliance. Empty CWT and DWT after each
use.
37
Do not grip DWT handle to
lift or move the appliance.