Publicité
Les langues disponibles
Les langues disponibles
•
Connect the power cord only to an appropriately fused and wired AC outlet with the correct voltage,
as specified on the product.
•
Disconnect from line voltage by removing the power cord from the AC outlet.
•
Connect no more than the appropriate number of chargers to a 15 A circuit or 20 A circuit, as limited
by any certified power strip being used.
•
The equipment shall be connected to a nearby and easily accessible socket outlet.
NOTE: Daisy chaining power strips are not recommended. Limit circuit loading below 80 % of
the circuit rating.
MN008031A01-AB
Safety and General Information
9
Publicité
