Publicité
Les langues disponibles
Les langues disponibles
MN008031A01-AB
Chapter 5 : Troubleshooting
Chapter 5
Troubleshooting
The IMPRES 2 Adaptive Charger incorporates the following features:
•
A universal input power supply
•
A constant current rapid charger
•
A negative pulse conditioning charger
•
A reconditioning unit
•
A 2-USB Type A Power Outputs
•
A user selectable on and off switch for turning reconditioning On or Off.
The combination of the features are unique in a desktop charger. The operation of the radio with a
battery attached while in the charger is not recommended.
During the charging process, radio operation may result in minimally reduced radio performance and
extended battery charge time.
During the reconditioning process, the battery becomes fully discharged. The radio may shut down
during the reconditioning mode. It is recommended that the battery be calibrated without the radio
attached or the attached radio to be turned off.
When troubleshooting, always observe the color of the LED.
Table 5: Troubleshooting
Problem
No charger indication
Blinking Red Indication
22
What it means...
•
Charger contact is not be-
ing made.
•
No power to the charger.
•
Charger contact is not be-
ing made.
•
Battery is not chargeable.
What to do...
•
Check that the radio with
battery, or the battery
alone, is inserted correctly.
•
Make sure that the power
cord is securely plugged
into the charger and an
appropriate AC outlet, and
that there is power to the
outlet.
•
Remove the battery from
the charger and replace it
back into the charger.
•
Verify that the battery is a
Motorola Solutions-author-
ized battery.
Other batteries may not
charge.
•
Remove power from the
battery charger. Clean the
gold metal charging con-
tacts of both the battery
Publicité
