Toro 21621 Manuel De L'utilisateur page 25

Folding the Handle
WARNING
Unfolding the handle improperly can damage
the cables, causing an unsafe operating
condition.
• Do not damage the cable(s) when folding
or unfolding the handle.
• Ensure that the cable(s) are routed to the
outside of the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the battery from the machine.
2. Disengage the handle locks until you can move
the upper handle freely
Note:
Hold the handle while disengaging the
handle locks to avoid pinching your hands.
Figure 22
3. Fold the handle forward to the fully forward
position as shown in
Important:
Route the cables to the outside
of the handle locks as you fold the handle.
4. To unfold the handle, refer to
Handle (page 10).
(Figure 22).
Figure 21.
4 Unfolding the
g410315
23