Toro 21621 Manuel De L'utilisateur page 19

During Operation
Starting the Machine
1. Ensure that the battery pack is charged and installed in the machine; refer to
(page 14).
2. Squeeze the blade-control bar and hold it to the handle (A of
3. Press the electric-start button and keep it pressed until the motor starts (B of
Using the Self-Propel Drive
•
To engage the self-propel drive, pull the
self-propel-drive bar to the handle and hold it
(Figure 14).
Figure 14
1. Self-propel-drive bar
Note:
To adjust the ground speed, adjust the
speed-control knob (Figure 15).
Figure
Figure 13
1. Speed-control knob
•
To disengage the self-propel drive, release the
g422669
self-propel-drive bar.
17
Installing the Battery Pack
13).
Figure 13).
Figure 15
g422654
g422658