Toro 21621 Manuel De L'utilisateur page 20

Adjusting the Blade Speed
This machine has 2 blade-speed settings: A
•
When set to the A
UTO
cutting conditions are detected and the blade speed increases when necessary to maintain quality of cut.
•
When set to the M
AX
Press the blade-speed button on the electric-start housing to adjust the blade speed setting
1. Blade-speed button
Recycling the Clippings
Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn.
Important:
Ensure that the rear plug is locked in place. To lock the plug, raise the rear deflector (A of
Figure 17), and firmly push the plug down until it snaps into place (B of
Note:
To unlock the rear plug, rotate the lever on the plug to the right
UTO
setting, the blade speed is adjusted automatically for greater efficiency; changes in
setting, the blade speed remains at the highest speed at all times.
and M .
AX
Figure 16
Figure 17
(Figure
18
(Figure 16).
Figure 17).
18).
g422656
g378112