BESAFE Go Beyond Mode D'emploi page 8

Installing the seat with the vehicle belt
1.
Position the seat on the vehicle seat. Make sure the inner part is in the
upright position (NOT lay flat position) and the carry handle is up in the
carrying position. (1, 2, 3)
2.
Take the hip belt part of the vehicle's 3-point belt and guide it under the 2
hip belt guiders. Then fasten the seat belt buckle with a "click". (4, 5, 6)
3.
Tighten the hip belt part by pulling on the shoulder belt part. (7)
1
5
Click!
2
3
6
4
7
BeSafe Go Beyond | 8