BESAFE Go Beyond Mode D'emploi page 14

Placing the child into the seat
1.
While pressing the button of the central adjuster, pull the shoulder belts
away from the seat with a flat hand. Make sure to pull the belts evenly
so that they stay at the same length. Do not pull on the shoulder pads, as
they are fixed and cannot move. (1)
2.
Open the harness buckle. (2)
3.
To keep the shoulder straps out of the way, place the shoulder pads onto
the magnets on each side of the seat shell. (3, 4)
4.
Place your child into the seat and adjust the position of the shoulder
belts and headrest if needed - see section "Adjusting to the growing
child".
5.
Place the shoulder belts over the child's shoulders and close the buckle:
CLICK! (5)
6.
Pull the central adjuster strap straight away from the seat to tighten the
harness. Make sure to tighten the harness extremely well, so that you
can no longer make a horizontal fold in the belts. When you tighten the
harness, make sure that the child is positioned well against the backrest.
(6, 7, 8)
1
5
Click!
2
6
3
4
7
8
BeSafe Go Beyond | 14