EWT OSCILLOR 40 CHROME Manuel D'utilisation page 9

NL
larly
SPECIFICATIONS
not
Model
Power
grill
Number of speeds
Oscillation
grills
Tilt adjustment
mbly
Oscillation switch
Number of blades
Blade material
g.
s or
Grill material
may
Grill diameter
Removeable grill
Handle
ental
Voltage
dren
Frequency
when
Product dimensions (LxDxH)
king
Product weight
BEFORE FIRST USE
ease
astic
1. Please read these instructions carefully before using the
able
appliance and keep them for future use.
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before using the appliance for the first time, remove the
appliance's protective films or stickers.
ating
ASSEMBLY
n the
ation
1. Place the bracket into vertical position. Attach the motor (7)
to the bracket (11) using the mounting screw (12).
ease
2. Unscrew the blade centre cap (2) by turning it in a clockwise
fully
direction. Unscrew the safety nut (4) of the motor shaft (6)
by turning it in an anti-clockwise direction.
3. Attach the back grill (5) to the motor shaft (6) making sure
that you align the three holes with the three mounting stubs
located at the front of the motor. Attach the back grill using
the safety nut (4) by turning it in a clockwise direction.
4. Attach the fan blade (3) to the motor shaft (6). Tighten
the blade centre cap (2) by turning it in an anti-clockwise
direction. (Important: make sure that the blade centre cap
(2) is sufficiently tightened to the surface of the motor shaft
(6).
5. Unscrew the mounting screw (14) located on the bottom of
the grill.
6. Assemble the front grill (1) and the back grill (5) by placing
the hook (15) at the top. Tighten using the locking latches
located all around the grill and screw in the small mounting
screw on the bottom of the grill (14) for your safety. Ensure
that all elements are correctly attached.
Oscillor_40C_A4.indd 9 Oscillor_40C_A4.indd 9
OSCILLOR 40 CHROME
3: slow, medium, fast
Transparent plastic
(quieter than metal blades)
Yes: easy to clean
INSTRUCTIONS FOR USE
1. Plug the appliance into the socket.
60W 2. Activate the fan by turning the speed control button (9)
located at the back in a clockwise direction. The button
Yes: automatic also allows you to set the speed by selecting the FAST "3",
Yes: manual MEDIUM "2" or SLOW "1" positions.
Yes 3. In order to set the direction of the air flow upwards or
3 downwards, lift or lower the motor unit or the back grill.
Make sure that your fingers do not go through the grill.
4. Turn the button in an anti-clockwise direction to switch the
Metal fan off.
>40 cm
SPEED
Yes Turn the speed control button (9) to set the fan speed to the
220-240V~ FAST "3", MEDIUM "2" or SLOW "1". Turn the button in an anti-
50Hz clockwise direction to stop the fan.
45 x 32 x 55 cm
OSCILLATION
4 kg
In order to activate the oscillation function, push the oscillation
control button downwards (8). Push the oscillation control
button (9) upwards again to stop oscillation.
CLEANING AND MAINTENANCE
• Always unplug the appliance from the electricity supply and
let it cool down completely prior to cleaning it.
• Do not use an abrasive sponge, a scouring pad or a stiff
brush to clean the appliance.
• Clean the area close to the motor very carefully.
• Only use damp cloth to clean the outer surfaces of the
appliance. Do not immerse the main body of the appliance
into water.
• Make sure that the motor and the appliance's other electrical
components do not come into contact with water.
• Always store the appliance in an environment with as little
dampness as possible.
THIS APPLIANCE IS DESIGNED FOR DOMESTIC USE ONLY
FR EN NL
9
11/12/19 11:11 11/12/19 11:11