Tips - Montarbo FiveO EVE Série Mode D'emploi

MIXING CONSOLES WITH BUILT-IN EFFECTS

TIps

We strongly suggest you to avoid exposition to loud music for prolonged periods, you risk to seriously
damage your hearing.
In order to achieve best signal-to-noise ratio in mono channels, please keep the LEVEL knobs around
"0" area, then use the TRIM knob to adjust preamp gain, while checking the CLIP LED. If you need
to hardly raise the LEVEL knob it means that you probably did a low setting of TRIM knob. In order to
avoid too much amplification, which could even boost sound noise floor, please raise the TRIM knob
while double checking the CLIP LED. On the other side, when you need to hardly reduce the LEVEL
knob, it means you did a high setting of TRIM knob. In order to avoid overload, reduce the TRIM knob
while double checking the CLIP LED.
In order to achieve best signal-to-noise ratio in stereo channels, please press the sensitivity switch
according to output level of your source (+4/-10). If you need to hardly raise the LEVEL knob it means
that you probably did a low setting of input sensitivity switch. In order to avoid too much amplification,
which could even boost sound noise floor, please change the input sensitivity switch while double
checking the sonic source. On the other side, when you need to hardly reduce the LEVEL, it means you
did a high setting of input sensitivity switch. In order to avoid overload, change the input sensitivity
switch while double checking the sonic source.
Be careful using extremely EQ settings, which could overload that channel as well its FX send and even
the Master section. We suggest you to use the EQ to emphasize sound nuances and details, even
cutting EQ on other channels!
In order to avoid internal FX overload, please carefully check the DsP level LEDs. CLIP LED should just
flash on more dynamic music parts. If the CLIP LED is continuously lit, please decrease the setting of
FX send knobs.
In order to prevent switch-on thump, please mute your sound system before pressing the PHANTOM
switch to activate the phantom power supply.
Owner's manual | EVE sERIEs professional mixer
6