Montarbo FiveO EVE Série Mode D'emploi page 13

1.2 sTEREO ChANNEL
CD/TApE inputs
15
CD/TAPE IN
The RCA-type CD/TAPE inputs are used to add an external signal source (e.g. CD player, MP3 player,
audio board, etc.) into the console.
These inputs can also be used as a –10dBV stereo line input for tape machines, MIDI instruments or
other signal sources, like the output of a second EVE console, that do not require any processing.
Please note that there's no level control, so you should adjust the level from the output of the source.
16 CD/TAPE OUT
These connectors are wired in parallel with the MAIN OUT and carry the main mix signal (unbalanced).
Connect the CD/TAPE OUT connectors to the inputs of your recording device. The output level is
controlLED via the high-precision MAIN MIX fader or knob.
17 CD/TAPE TO MIX or TAPE TO MIX
When the this switch is depressed, the input signal is assigned to the main mix providing an
additional stereo input.
CD/TAPE TO PHONES or TAPE TO CTRL
18
Press this switch to listen the additional 2-track input via the PHONEs OUT and/or CTRL ROOM OUT.
This provides an easy way to monitor signals coming from the source connected to CD/TAPE INPUT.
Owner's manual | EVE sERIEs professional mixer
13