Publicité
Les langues disponibles
Les langues disponibles
SRM-2320T
6.
Remove grass and leaves
from the grid between the
recoil starter and fuel tank.
7.
Assemble components in
reverse order.
Exhaust System
Spark Arrestor Screen
Level 2.
Parts required: Spark Arrestor Screen, Gasket(s).
1.
Remove spark plug lead and engine cover.
2.
Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3.
Remove spark arrestor screen
cover (C), gaskets (D), (E), and
screen (F), from muffler body.
4.
Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
5.
Replace screen if it is cracked,
plugged, or has holes burned
through.
6.
Assemble components in reverse order.
X7742275500
© 12/23 ECHO Incorporated
MAINTENANCE
C
D
E
F
39
Publicité
