MAINTENANCE
Fuel Filter
Level 1.
Parts required: Tune-Up Kit.
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1.
Use a clean rag to remove
loose dirt from around fuel cap
and empty fuel tank.
Do not damage fuel line while removing fuel filter from tank or line.
2.
Pull the fuel filter from the tank.
3.
Do not remove the wire coil clamp to remove the fuel filter. Pinch the
fuel filter with the fingers on one hand and the fuel line with the other
hand. Pull and twist slightly to separate.
4.
Install the new filter with the reverse action.
Note: Federal EPA regulations require all model year 2012 and
later gasoline powered engines produced for sale in the
United States to be equipped with a special low permeation
fuel supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel
supply hoses certified by EPA can be used to replace the
original equipment supply hose. Fines up to $37,500 may be
enforced for using an un-certified replacement part.
36
SRM-2320T
X7742275500
© 12/23 ECHO Incorporated