Publicité
OPERATION INSTRUCTIONS
APP CONNECTION & OPERATION
1. Open the app. After the initial "Sign Up" process has
been completed, the app opens, by default to the "Add
Device" screen.
2. Make sure that your device and stove connect to the
same Wi-Fi network.
3. Make sure the stove is plugged into an electrical outlet
and can be powered on.
4. There is a red flashing indicator light located above
the configure button. Note: When the indicator light
is flashing the unit is ready to be paired. When the
indicator light is solid the unit has successfully paired.
WIFI
ON/OFF
(POWER)
5. Select "Add Device". Note: Access to location and
Bluetooth is required while using the app.
6. A screen with "Discovering Devices" will come up.
Press the "Add" button.
7. Enter the Wi-Fi information.
8. The blue circle indicates the device is in the process
of being added.
9. Once the unit has been successfully added a green
check mark will appear. The app and unit are now
ready for use.
DISPLAY
HEAT
MODE
RANGE
Device Select
Screen
Current Room
Temperature
Stove Setting
Decrease
Temperature
Setpoint
Power ON/OFF
19
© 2024 United States Stove Company
Device Name &
Device Sharing
Settings
Temperature
Adjuster
Increase
Temperature
Setpoint
Mode
Heat Range
Publicité
