Broadcast Station Presets; Setting Radio Station Presets Manually; Selecting Presets - Tascam CD-400U DAB Mode D'emploi

DAB ManualTune
≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡≡
0 Press the main unit HOME/MENU button or remote control
MENU button again to return to the ordinary display.
DRC
Use this option to adjust the amount of Dynamic Range Control
(DRC) applied to received broadcasts. DRC is used to reduce the
range between high and low volumes of audio and is some-
times applied at the broadcast source. Pop music might have
a high value of DRC applied, appropriate for constantly high
listening levels, while classical music broadcasts might have no
DRC applied to allow the listener to hear the full dynamic range
of the source volume.
0 You can select one of the three DRC settings: off, low, high.
DAB DRCsetting
< DRC OFF
When set to high, the broadcast DRC is applied. Set to low,
only half the broadcast DRC value is applied. Set to off, no
DRC is applied.

Broadcast station presets

This unit can have up to 20 DAB station presets.

Setting radio station presets manually

1.
Select DAB as the current source. (see "Selecting the play-
back source" on page 20)
2.
Tune in the station that you want to add as a preset. (see
"Changing the received frequency" on page 32)
3.
Press the main unit 7 [M.PRESET] button when shift mode
is active (SHIFT indicator lit) or press the remote control
PRESET button.
P01 will blink at the top of the Home Screen.
DAB P01 Classic
DLS message 1/5
NOTE
i The blinking P01 will disappear after some time passes.
i If * appears, the preset already has an assigned frequency.
4.
Turn the main unit MULTI JOG dial or use the remote con-
trol . / / [ l / ; ] buttons to select the preset number to
assign.
5.
Press the main unit MULTI JOG dial or remote control EN-
TER button to confirm the preset.

Selecting presets

0 When in preset mode, turn the main unit MULTI JOG dial or
use the remote control k and j buttons to select a preset
station.
0 You can also use the main unit or remote control number
buttons to directly enter a preset number, and press the
ENTER button to select that station.
NOTE
i There is no automatic preset function.
i Using Local scan or Full scan will erase presets that have
already been added.
The first station found using Local scan or Full scan will auto-
matically be added to P01.
i Presets that have not had a station assigned to them will be
skipped and cannot be selected.
In the following example, P01, P05, P06 and P08 have stations
assigned, while P02-04 and P07 do not.
>
P01
6 – Using DAB tuner
k k
P05 P06
§ §
j j
TASCAM CD-400U DAB
k
P08
§
j
31