Publicité
PRECAUTIONS
Although fuses at the input and outputs of the controller
protect its circuits in case of an overload or overvoltage, we
recommend installing an additional protection device on the
controller's supply circuit.
The ambient temperature of the room in which the controller
is located MUST ALWAYS REMAIN BETWEEN 32°F AND 104°F
(0°C TO 40°C).
To avoid exposing the controller to harmful gases or exces-
sive humidity, it is preferable to install it in a corridor.
DO NOT SPRAY WATER ON THE CONTROLLER
3
TC4-1CH.rev.01
Publicité
