Publicité
TC4-1CH
P
ROGRAM SEQUENCE
To control the damper over a longer time period, a sequence of three
programs can be defined. Each program defines a linear relationship
between outside temperature and damper opening. The duration of a
program is defined by a starting day. The current day can be adjusted to
start the sequence on any given day. Once the third program is in opera-
tion, the controller operates with the current parameter settings until the
program sequence is deactivated.
Program I
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
0
Start Day II
Storing a Program Sequence
Set the selection knob to PROGRAM. The current day number
flashes on the display.
Press the push-button. The state of the program sequence is dis-
played, i.e. ON/OFF. The program must be turned off to change the
parameter settings.
First program:
Press the push-button. The minimum temperature is displayed,
alternating with "P-1". Use the adjustment knob to adjust the mini-
mum temperature for the first program curve. Press the push-button
to store the value in memory.
The minimum opening is displayed, alternating with "P-1". Use the
adjustment knob to adjust the minimum opening for the first program
curve. Press the push-button to store the value in memory.
18
TC4-1CH.rev.01
Program II
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2
Program III
1 2 3 4 5 6 7 8 9 0 1 2 3 4
1 2 3 4 5 6 7 8 9 0 1 2 3 4
1 2 3 4 5 6 7 8 9 0 1 2 3 4
Start Day III
Day
max. 99
Publicité
