KTM A54001996500 Instructions De Montage page 21

–
Position lock ring
line with the release button
–
Tighten screws
Guideline
Screw, lock
ring
–
Remove the motorcycle from the lift stand (see Owner's
Manual).
501777-01
Operation
–
The 2-way Factory Start allows two settings at a distance
of 12 mm from each other for the most varied road conditi-
ons. While sitting on the motorcycle, bend over the handle-
bars, grasp the rim and compress the fork, press lock but-
2
ton in the upper or lower position and spring outwards
slowly until the lock button is secured in lock ring
Then release the button. When the fork is compressed for
the first time during a ride, the lock button automatically
disengages from the lock ring.
501778-01
1
so that the lock area runs in a direct
2
.
4
.
M3x10 1.2 Nm (0.89 lbf ft)
ASSEMBLY 5
Loctite ® 243™
1
.
9