Recall
Access to additional network services can be gained by using the
recall button
R
more information.
Press the recall button
connected to a PBX (TBR only). Default timing for the UK is 97
and should not be altered.
Troubleshooting
Telephone does not work
-
Check that the telephone cord is undamaged and properly
plugged in.
-
Disconnect any additional equipment that may be connected. If
the problem is resolved, the fault is with the other equipment.
-
Test the equipment on a known working line (e. g. at a
neighbour's). If the product works then the fault is with the line.
No number is shown when a call is received
-
In order for this feature to function, you must subscribe to the
Caller Identification service from your network provider.
-
If a message shows on the display, the call may be an
international call (no data received), or from a private or blocked
number.
-
It may not be possible to receive CID information if the phone
operates in a PBX system.
If the telephone still does not work, contact the place of purchase for
service. Don't forget the receipt or copy of the invoice.
www.doro.com
Other
,
and
keys. Contact your network operator for
*
#
followed by the extension number to when
R
English
13