Télécharger Imprimer la page

ProMed KHP-2.3G Instructions D'utilisation page 13

Couverture chauffante

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
TROUBLESHOOTING
Problem
The device is not connected to the
power supply system
The device does not
The device is not switched on
warm up.
The device is defective
The heating blanket and the controller
On the controller
are not, or not correctly, connected to
display screen,
each other.
the letter "E" is shown
The device is defective.
CARE INSTRUCTIONS
DANGER - Risk to life due to electric shock
Before cleaning the heating blanket, the power plug must be disconnected from the power socket.
The heating blanket can be washed by hand or in the washing machine at 40 °C using a
mild detergent.
Do not iron the heating blanket.
Do not bleach the heating blanket.
Do not dry clean the heating blanket.
Do not tumble dry the heating blanket.
Do no use any high-pressure cleaners.
Make sure that the controller does not come into contact with any liquids. Liquids may result in damage.
Never use the heating blanket while it is wet or damp. The heating blanket must not be switched on while it
is drying.
Let the heating blanket air dry. Do not use any auxiliary means (such as clothes pegs) to hang it up to dry.
This may damage the cables inside.
DANGER - Risk to life due to electric shock
After washing, wait until the heating blanket has dried completely before inserting the mains plug and
connecting it to the power supply. Never use when wet!
Never switch on the heating blanket to dry it.
WARNING – Material damage
Do not dry on a radiator, in the sun, or on any other heat source.
Do not iron.
Do not wring out or deform the heating blanket.
When the heating blanket and the connector are dry, reconnect the control unit plug into the heating
blanket's connector.
Cause
Insert the power plug into the power
socket and switch on the device
Switch on the device
Send the device to the manufacturer
Connect the plug of the controller
the plug of the heating blanket
Send the device to the manufacturer
Troubleshooting
(G)
to
(H)
DE
DE
EN
EN
FR
FR
IT
IT
ES
ES
NL
NL
RU
RU
PL
PL
SE
SE
FI
FI

Publicité

loading

Ce manuel est également adapté pour:

Khp-2.3