Publicité
Les langues disponibles
Les langues disponibles
TAPE OPERATIONS
Deck 2
Tape playback
in both decks can be performed
in the same way.
Use Type I (normal)
tapes only.
Tapes are played back on one side only.
1
Press theTAPE button and press the
/4 button
to open the cassette holder.
The side
Deck 1
eck 2
E
o
/4
Insert a tape with the exposed
side facing downward
and the
side to be played facing toward you.
Push the cassette
holder to close.
2 Press the F
button to start play.
To stop
play, press the
/A
button.
To pause play,
press the II button. To resume play, press again.
To
fast forward or rewind,
press the +
or >
button in stop
mode.
Then press the
/=
button to stop the tape.
To start play when the power is off (Direct Play
Function)
Press the >
button
under the tape deck.
The power is turned
on and play of the inserted
tape begins.
CONTINUOUS
PLAY
TO start play on deck 1 after play on deck 2 without
interruption,
proceed
as follows:
During play on deck 2, press the 11 button then the >
button for
the deck 1.
When play on deck 2 ends, the II button for the deck 1 is released
automatically
and play on deck 1 starts.
\
About cassette tapes
To prevent
accidental
erasure,
break off the plastic tabs on
the cassette
tape after recording
with a screwdriver
or other
pointed
tool.
Side A
e
e
"0
':@
\
.4~Q-
Tab for
side A
To record
on the tape again,
cover the tab openings
with
adhesive
tape, etc.
120-minute
o r longer tapes
are extremely
thin and easily
deformed
or damaged.
They are not recommended.
Take up any slack
in the tape with a pencil or similar
tool
before use. Slack tape may break or jam in the mechanism.
J
10
ENGLISH
Publicité
