Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL
BEFORE OPERATION
Inserting batteries
Detach
the battery
cover on the rear of the remote
control
and
insert two R6 (size AA) batteries,
R6 (AA)
When to replace the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace
the batteries
with new ones.
To use the remote control
Some
operations
can be performed
using the buttons
on the
remote control
only, or those on the main unit only, while others
can be performed
using the buttons
on the main unit as well as
on the remote control.
This instructions
manual clearly describes
the buttons
available
for each operation.
m
If the unit is not going to be used for an extended
period
of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
The remote control
may not operate
correctly
when:
- The line of sight between
the remote
control
and the unit is
exposed
to intense
light, such as direct sunlight.
- Other remote controls
are used nearby (television,
etc.)
F
To
turn the unit on
Press
one of the function
buttons
(CD, AUX, TUNER/BAND,
TAPE).
Playback
of the inserted
disc, or the previously
tuned station
is
received
(Direct Play Function).
Note that playback of the inserted tape does not begin by pressing
the TAPE button.
The POWER
button is also available.
To turn the unit off
Press the POWER
button again.
To use the headphones
Connect
headphones
with a stereo mini plug (03.5 mm, '/8 inch)
to the PHONES
jack.
No sound is output from the speakers
while the headphones
are
plugged
in.
To
use the FUNCTION button
The FUNCTION
button substitutes
for the function
buttons
(CD,
AUX, TUNER/BAND,
TAPE)
on the main
unit. Each time the
FUNCTION
button is pressed while power is on, the next function
is selected
cyclically.
ENGLISH
5
Publicité
