Publicité
Les langues disponibles
Les langues disponibles
AREA TITLE menu
To Quit Editing
• To return to the Area Title menu, move the cursor to RET, then
press the CAM (SET) key.
• To cancel one area title, move the cursor to RESET, in the AREA
TITLE menu, then press the CAM (SET) key.
• To return to.the SPECIAL 1 menu, move the cursor to RET, then
press the CAM (SET) key.
• To erase all the area titles, move the cursor to RESET, in the AREA
TITLE selection menu, then press the CAM (SET) key.
AREA TITLE 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
()
'Mill?*
*-*/%$
SPACE
- POSI RET RESET
t
Display Position setting menu
Notes:
• An area title is displayed under the camera ID if both of them
are set in the same position. If different, they are displayed in
the area title position.
• An area title appears while the camera direction deviates
within 45 degrees from the set position. If two or more area
numbers share a common subject in a scene, the title of the
largest number is displayed.
FLOOR 1
NORTH
• Patrol (PATROL)
A routine of manual operations can be stored for 30 seconds at maxi¬
mum and reproduced repetitively.
PATROL
1. For PATROL LEARN, set the following parameters for the starting
position. These parameters are stored when PATROL LEARN
mode starts.
• PAN/TILT/ZOOM/FOCUS settings
• IRIS setting
• SHUTTER setting
• AGC setting
• SENS UP setting
• WHITE BALANCE setting
• IMAGE HOLD setting
• AREA TITLE setting
• DIGITAL FLIP setting
• PRIVACY ZONE setting
• CAMERA ID setting
• PROPO.PT setting
• PAN LIMIT setting
• BURSTsetting
• CLEANING setting
After starting LEARN, the following manual operations are stored.
• PAN/TILT/ZOOM/FOCUS operation
• IRIS operation
• Preset position movement
SPECIAL 1 menu
** SPECIAL i **
PRIVACY ZONE
OFF(ENB)'*
PROPO.P/T
ON
AREA TITLE
ON (USER)"*
PATROL
PLAY,
ALARM IN/OUT
%
PASSWORD LOCK
OFF"*
CLEANING
OFF
EL-ZOOM
ON
PRESET ALM
OFF
IMAGE HOLD
OFF
RET
Setup menu
j
*♦ SET UP MENU **
PRESET 1 "*
MAP '*
HOME POSITION OFF
SELF RETURN
OFF
AUTO MODE
OFF
AUTO PAN KEY
AUTO PAN
LOCAL/ REMOTE
LOCAL
PATROL
ISTOPJ
CLEANING
OFF
CAMERA %
2. Open the SET UP menu and move the cursor to SPECIAL 1.
Select LEARN, PLAY or STOP for PATROL by moving the joystick to the right or left.
LEARN:
A series of manual operations is stored.
PLAY:
Stored operations are reproduced.
STOP:
LEARN or PLAY is not activated.
29
Publicité
