Publicité
Les langues disponibles
Les langues disponibles
FIRMWARE UPDATE
Go to
https://www.bradleysmoker.com/product/2019-pro-update/
(scroll to firmware tab) and download the latest firmware update and save it on USB flash drive.
Please follow these steps:
1. Make sure the smoker is turned ON
2. Insert the USB flash drive containing downloaded .bin file.
3. Touch and hold recipe button for 3 seconds, buzzer will sound and smoker will read the flash drive.
During this updating process, the display will show EEEE.
4. When the update is complete, the smoker will restart automatically.
5. After the smoker restarts, you can remove the flash drive.
6. Insert the protective cover to the USB slot.
7. To check the software version or confirm it has been installed , power OFF the smoker.
8. Press and hold the rotary dial, while turning ON the main power switch at the back.
9. The display will show the current software version.
All the operations are disabled during this period.
10. To start the smoker normally again power the smoker OFF for 3 seconds and then switch it back ON
*Note: Do not power off the smoker during the update.
*Note: The USB port of the unit is designed for uploading recipes and updating the smoker software only.
DO NOT CONNECT TO ANY COMPUTERS OR SUPPLY POWER TO ANY DEVICES!
Doing so, may cause overload or malfunction of this product.
19 |
P a g e
Publicité
