Publicité
Les langues disponibles
Les langues disponibles
BISQUETTE ADVANCEMENT BUTTON
To manually advance the bisquette, touch the button, the button light will flash blue and the
turntable will rotate 2x ½ turn. Withdrawing the new and discarding the burnt bisquette happens at
the same time. Digital display shows "FEEd" during bisquette advancement. After the bisquette has
been advanced digital display will show "dONE"
After turntable has completed the turn, the turntable reverses slightly and the cabinet internal
temperature will be displayed once again.
Note: Water bowl must be emptied regularly every 2-3 hours. Otherwise bisquette jam can occur.
Note: This button is designed mainly for emptying the system at the end of the smoke session.
Set your settings first, before loading the bisquettes. Otherwise pressing this button will advance the bisquette
into the water bowl.
MEATPROBES 1 / 2
By touching this button, the button light will flash blue and the 4-digit display will show the current
probe temperature.
*Note: If no confirmation occurs within 5 seconds, the 4-digit display will switch back to the cabinet internal
temperature.
Rotate the rotary dial until the 4-digit display shows the desired target alert temperature.
Press the rotary dial to confirm the setting.
*Note: Adjustment will be cancelled if no confirmation is set within 5 seconds.
When the meat probe reaches the desired alert setting, the indication light will flash blue and alarm
will sound for 1 minute. To cancel the alarm press the rotary dial.
To cancel the meat probe operation, touch and hold the probe button for 3 seconds.
TEMPERATURE F / C
temperature in ℉ or ℃. touching the button once will change the unit.
By touching this button, the button light will flash blue and the 4-digit display will show current
℉
*Note: conversion from
℃
to
is calculated as follows: (
℃
℉
) = (Fahrenheit (
)-32) ÷1.8
17 |
P a g e
Publicité
