Publicité
Les langues disponibles
Les langues disponibles
3.5 Technical Data
Technical Data
All technical data, as well as the mechanical and electrical
characteristics, are specified in the data sheets of the corres-
ponding device variant, for special versions in the.corres-
ponding quotation / customer drawing of the product.
Observe the configuration
The performance characteristics and the mechanical design
of the product depend on the selected configuration (accord-
ing to order code).
3.5.1 Measuring wheel system
Mechanical characteristics spring bracket
Operating temperature
Shock resistance according
to EN 60068-2-27
Vibration resistance accord-
ing to EN 60068-2-6
Maximum working range
Operation Manual R60104.0009 - 01
NOTICE
NOTICE
-20°C ... +70°C
[-4°F ... +158°F]
2
1,000 m/s
, 6 ms
55 ... 2000 Hz, 100 m/s²
10 mm [0.39"]
The technical data of the encoder can be found in the relev-
ant operation manual/data sheet.
3.5.2 Approvals
The product meets the following criteria:
• Compliance with the European Directives:
– RoHS: Directive 2011/65/EU
• Compliance with the British Directives:
– RoHS: Regulations S.I. 2012/3032
The declaration of conformity and all certificates relating to
the product can be found on the homepage.
www.kuebler.com/de/docu-finder
4 Installation
4.1 Mechanical Installation
ATTENTION
Damage to the device due to transport or storage
Device failure, malfunction, device lifetime reduction.
• Check the packaging and the device for possible damages.
• In the event of visible damages, do not use the device and
do not put it into operation.
• Do not install the device after falling or being dropped.
• Send damaged encoders back to the manufacturer with a
completed return form (RMA).
EN | 19
Publicité
